Clutch Kit Opel 1.9 CDTI Z19DT | Astra H A04 | Vectra C Z02 | Signum Z03 | Zafira B A05 | OEM Similar to 5666012

Product Description:

Clutch Kit Opel Astra H | Signum | Vectra C | Zafira B | 1.9 CDTi Engines Type Z19DT for Dual Mass Flywheel | Includes Clutch Disc and Pressure Plate | Does not include Clutch Release Bearing and Clutch Release Screws and Dual Mass Flywwheel | OEM Similar to 5666012

Part no:

63090822

Similar OEM part number:

5666012 | 624322619 | 6606039 | 664080 | 93179220 | 93183253 | 93194079 | KE-OP55R | ADW193068 | ADW193042 | HK2200 | ECK230 | OPS2103 | 1611885 | LKCA670021 | 13240409 | 6606039 | 93194079 | QKT2988AF | 3000951186 | 3000970051 | 5106068 | 624322619 | 826955 |

Mounting Side:

Clutch

Compatible Models:

Opel Astra H (A04|l70) de | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010

SIGNUM (Z03) de | 2005 | 2006 | 2007 | 2008 |

VECTRA C (Z02) de | 2005 | 2006 | 2007 | 2008 |

ZAFIRA B (A05) de | 2005 | 2006 | 2007 | 2008 |

ZAFIRA B (A05) de | 2008 | 2009 | 2010 | 2011 |

Other Specifications:

For engines with dual mass flywheel

Without central clutch release : Without flywheel

Includes Clutch Disc and Pressure Plate

Number of teeth: 20

Hub Profile: 23.07 x 20.11 mm

Outside Diameter: 240 mm

Drive Type: Front Wheel Drive

Transmission Type: Manual Transmission

Clutch assembly procedure:

Before fitting the new clutch disc, it is important to check its axial runout. This may be a maximum of 0.5 mm. Higher values may cause dragging.

Afterwards, the splined hub of the clutch disc and the primary shaft of the transmission must be lightly greased all around with high-performance grease (temperature-resistant and able to withstand high surface loads). Now, the clutch disc can easily move back and forth along the primary drive shaft and the excess grease must be removed from both the splined hub and the primary drive shaft.

After all, if too much grease is used, centrifugal forces will carry it to the friction linings of the clutch disc during operation. Contaminated linings in this way will cause jerking or slipping of the clutch during driving.

It is possible to physically mount the clutch in both positions, but it is important to know that only one of the positions is correct. Even sometimes by mounting the disc upside down, the vehicle may appear to operate correctly in the short to medium term.

This is not real, as incorrect mounting will eventually lead to mechanical problems in the vehicle, and may even cause the disc itself or the thrust bearing to break.

It is very important to respect the correct position of the clutch disc to avoid mechanical damage.

The easiest way to do this is to locate the word on the clutch discs indicating its position;

Getriebe Seite Gearbox Side
Gearbox Side Gearbox Side
TM-Side Gearbox Side
Motor Seite Lado motor
Motor Side Motor side
Schwungrad Seite Lado motor
Flywheel Side Lado motor
Cote Volant Engine side

Warranty:

1 Year Warranty Against Manufacturing Defect.

The images of our products may vary according to the manufacturer, maintaining all the technical characteristics and compatibilities indicated in the product specifications.