Airbag Spring Ring for Nissan Micra Navara Murano Note Pathfinder Qashqai X-Trail OEM Similar 25567EB06A

Product Description:

Airbag Spring Ring for Nissan Micra Navara Murano Note Pathfinder Qashqai X-Trail OEM Similar 25567EB06A

MICRA (K12) from 2003 to 2010

MURANO (Z50) from 2003 to 2007

NAVARA | PICK UP | PATHFINDER | FRONTIER (D40|R51) from 2004 to 2015

NOTE (E11) from 2006 to 2013

PATHFINDER (R51) from 2004 to 2015

QASHQAI (J10) from 2007 to 2014

X-TRAIL (T31) from 2007 to 2014

Connectors | Check in Images:

2 airbag connections (steering wheel):

2-pin (Yellow) + 1 8-pin Airbag Spiral Connection

1 11-pin Vehicle Wiring Connection

2 8-pin Control Connections

Important: Check the internal diameter measurements for the 39 mm steering wheel level sensor coupling and the 6 and 13 mm mounting pin measurements for the sensor before ordering.

Check compatibility with the original reference and mounting measurements, and consult the service manual for installation instructions.

Reference:

T36708

Similar OEM Reference:

25567EB06A

Mounting Side:

Steering Wheel

Compatible Models:

MICRA (K12) de | 2003 | 2004 | 2005 |  

MICRA (K12) de | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 

MURANO (Z50) de | 2003 | 2004 | 2005 | 2006 | 2007 | 

NAVARA | PICK UP | PATHFINDER | FRONTIER (D40|R51) de | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 

NOTE (E11) de | 2006 | 2007 | 2008 | 2009 |  

NOTE (E11) de | 2009 | 2010 | 2011 | 2012 | 2013 | 

PATHFINDER (R51) de | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 

QASHQAI (J10) de | 2007 | 2008 | 2009 | 2010 | 

QASHQAI (J10) de | 2010 | 2011 | 2012 | 2013 | 2014 |

X-TRAIL (T31) de | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 

Other Specifications:

Connections | Check in Images:

2 airbag connections (steering wheel):

2-pin (Yellow) + 1 8-pin Airbag Spiral Connection

1 11-pin Vehicle Installation Connection

2 8-pin Remote Control Connections

Important: Before ordering, check the internal diameter measurements for the 39 mm steering wheel level sensor coupling and the 6 and 13 mm anchor pin measurements for said sensor.

Check compatibility with the original reference and the attached files below.

THIS ELECTRICAL COMPONENT DOES NOT HAVE A WARRANTY OR RETURN.

ASSEMBLY INSTRUCTIONS

The airbag ring must be assembled and disassembled in the center position (the tires must be in the straight-ahead position) and the steering wheel must be completely centered.

The ring is supplied in the central position and is secured with a pin. The pin must be released after assembly, releasing the spring.

If centering is required, follow these instructions:

Turn the rotor counterclockwise (left) to the stop. Turn approximately 3.0 turns clockwise (right) until the marks on the rotor are aligned.

The spring must not be released before installation under any circumstances; otherwise, if released before assembly, the spring will be distorted beforehand, and it is very likely to detach during assembly and become unusable.

Spiral Cable

The spiral cable connects the rigid steering column to the movable steering wheel. It ensures communication between the airbag control unit and the gas generator during the steering wheel's rotational motion. The conductive foil is wound in such a way that it is capable of following the rotational motion of 2.5 turns in each direction.

It is important to be very careful when installing or removing this spiral cable. Ensure that the steering is in the center position and that the wheels are also straight. If the spiral cable has been removed, it cannot be rewound.

The supplied products must be used only for their intended purpose. Assembly must be carried out by qualified personnel. The products are delivered without assembly instructions.