Ring | Airbag Coil Spring Toyota Corolla E12 2002 to 2007 | RAV 4 II A2 2000 to 2005 | Yaris P1 1999 to 2005 | 8430652041

Product Description:

Steering Wheel Connector Ring |g Wheel Connector Ring | Rosco Reel | Airbag Coil Spring Toyota Corolla (E12) from 2002 to 2007 | RAV 4 II (A2) from 2000 to 2005 | Yaris (P1) and Yaris Verso (P2) from 1999 to 2005 | OE 84306-52041

2 Airbag Connections | Steering Wheel: OE 84306-52041

2 Airbag Connections | Steering Wheel: 1 2-Pin Connector + 2-Pin Airbag Spiral Connection (Orange)

2 Connections to Vehicle Installation: 1 2-Pin Connection + 1 2-Pin Connection with Terminal

Part No:

T36051

Similar OEM Part No:

8430652041 | 84306-52041 | 84306 52041

Mounting Side:

Steering Wheel

Compatible Models:

YARIS (XP10) de | 1999 | 2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 

COROLLA (E12) de | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 

RAV 4 (XA20) de | 2000 | 2001 | 2002 | 2003 | 2004 |  

RAV 4 (XA20) de | 2004 | 2005 | 

Corolla (E12) de 2002 a 2007

RAV 4 II (A2) de 2000 a 2005

Yaris (P1) de 1999 a 2005

Yaris Verso (P2) de 1999 a 2005

Other Specifications:

Check Connections (Detail in Pictures)

2 Airbag Connections | Steering Wheel: 1 2-Pin Connector + 2-Pin Airbag Spiral Connection (Orange)

2 connections to vehicle installation: 1 2-Pin Connector + 1 2-Pin Connection with Terminal

Check compatibility with original part number and attachments below
THIS ELECTRICAL COMPONENT IS WITHOUT WARRANTY AND RETURN

ASSEMBLY INSTRUCTIONS Fit

ting and removal of the airbag ring must be carried out in the centre position (tyre direction must be in the straight ahead position) and the steering wheel in the fully centred position.

The ring is supplied in the central position and secured with a pin, the pin must be released after installation by releasing the spring.

If recentring is required, follow the instructions below:

Turn the rotor counterclockwise (left) as far as it will go. Turn the rotor approximately 3.0 turns clockwise (right) until the marks on the rotor are aligned.

The spring must not be released before installation under any circumstances, otherwise, if it is released before installation, the spring will be distorted beforehand and is very likely to become detached during operation and become unusable.

Spiral cable

The spiral cable represents the connection between the rigid steering column and the movable steering wheel. It ensures communication between the airbag control unit and the gas generator during the rotational movement of the steering wheel. The conductive foil is wound in such a way that it is able to follow the rotational movement of 2.5 turns in each direction.

It is important to be very careful when assembling or disassembling this spiral cable. It must be ensured that the steering is in the central position and that the wheels are also straight. If the spiral cable has been dismantled, it cannot be rewound.

The products supplied may only be used for their intended purpose. Installation must be carried out by qualified personnel. The products are delivered without assembly instructions.