VALEO brand VAG Group airbag spiral reel | vehicles without steering angle sensor | 6Q0959653A | 251658

Product Description:

VALEO Ring | VALEO brand: Vehicle without steering angle sensor | OE 6Q0959653A | 251658

SEAT

Cordoba (6L) from 02-2002 to 04-2008

Ibiza (6L) from 02-2002 to 04-2008

Ibiza (6J) from 04-2008 to 04-2012

SKODA

Fabia (5J) from 03-2007 to 03-2015

Praktik (5J) from 07-2006 to 04-2010 | from 04-2010 onwards

Roomster (5J) from 07-2006 to 04-2010 | from 04-2010 onwards

VOLKSWAGEN

Multivan | Transporter (7H/T5) from 04-2003 to 2015

Polo (9N) from 10-2001 to 08-2009

Part no:

T34703

Similar OEM part no:

6Q0959653A | 251658 | 6Q0 959 653 A

Mounting Side:

Steering Wheel

Compatible Models:

SEAT

CORDOBA (6L) de | 2002 | 2003 | 2004 | 2005 | 2006 | 

CORDOBA (6L) de | 2006 | 2007 | 2008 | 

IBIZA III (6L) de | 2002 | 2003 | 2004 | 2005 | 2006 | 

IBIZA III (6L) de | 2006 | 2007 | 2008 | 

IBIZA IV (6J|6P) de | 2008 | 2009 | 2010 | 2011 | 2012 | 

SKODA

FABIA (5J) de | 2007 | 2008 | 2009 | 2010 |  

FABIA (5J) de | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 

PRAKTIK (5J) de | 2006 | 2007 | 2008 | 2009 | 2010 | 

PRAKTIK (5J) de | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 

ROOMSTER (5J) de | 2006 | 2007 | 2008 | 2009 | 2010 | 

ROOMSTER (5J) de | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 

VOLKSWAGEN

POLO (9N) de | 2001 | 2002 | 2003 | 2004 | 2005 |  

POLO (9N) de | 2005 | 2006 | 2007 | 2008 | 2009 | 

TRANSPORTER (T5|7H) de | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 

TRANSPORTER (T5|7H) de | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 

Other Specifications:

Connections

1 x 6-pin Airbag (Steering Wheel) Connection

1 Connection to Vehicle Installation 6-Pin + Terminal
Check compatibility with original part number and attachments below.
THIS ELECTRICAL COMPONENT IS NON-WARRANTY AND NON-RETURNABLE

ASSEMBLY INSTRUCTIONS

Fitting and removal of the airbag ring must be carried out in the centre position (tyre direction must be in the straight ahead position) and the steering wheel in the fully centred position.

The ring is supplied in the centre position and is secured with a pin, the pin must be released after fitting by releasing the spring.

If re-centring is required, follow the instructions below:

Turn the rotor counterclockwise (left) as far as it will go. Turn the rotor approx. 3.0 turns clockwise (right) until the marks on the rotor are aligned.

The spring must not be released before fitting under any circumstances, otherwise, if it is released before fitting, the spring will be distorted beforehand and is likely to become detached during the operation and become unusable.

Spiral cable

The spiral cable represents the connection between the rigid steering column and the movable steering wheel. It ensures communication between the airbag control unit and the gas generator during the rotational movement of the steering wheel. The conductive foil is wound in such a way that it is able to follow the rotational movement of 2.5 turns in each direction.

It is important to be very careful when assembling or disassembling this spiral cable. It must be ensured that the steering is in the central position and that the wheels are also straight. If the spiral cable has been dismantled, it cannot be rewound.

The products supplied may only be used for their intended purpose. Installation must be carried out by qualified personnel. The products are delivered without assembly instructions.

Warranty:

THIS ELECTRICAL COMPONENT IS NOT COVERED BY WARRANTY AND IS NOT RETURNABLE.

The images of our products may vary according to the manufacturer, maintaining all the technical characteristics and compatibilities indicated in the product specifications.