Brake Fluid | WINX Clutch Fluid 500 ml DOT 4 | FMVSS 116 DOT 3 | FMVSS 116 DOT 4 | SAE J1703 | ISO 4925 3 | ISO 4925 4

Product Description:

WINX Brake and Clutch Fluid 500 ml | Latest generation DOT 4 brake fluid | Additive for the first A.B.S. brake systems and with E.S.P. technologies. Also suitable for 4-stroke motorbikes of the highest performance.

Article no:

DOT4-05

Quality Levels:

Specification Constructors:

FMVSS 116 DOT 3 | FMVSS 116 DOT 4 | SAE J1703 | ISO 4925 3 | ISO 4925 4.

Packaging Format:

250 ml

Other Specifications:

Check with your mechanic and vehicle owner's manual to see if this fluid is suitable for your car.

All Delphi brake fluids meet and exceed international specifications FMVSS 116, SAE and ISO.

It is recommended that the brake fluid is changed according to the specifications of the particular manufacturer.

This product can be safely mixed with other fluids that meet the stated specifications. Not suitable for vehicles with mineral oil system (Citroen | LHM).

Contamination with water, dirt, petroleum products or other materials may cause brake failure or costly repairs.

Brake fluid can damage paintwork

Typical Dry Boiling Point: 252°C

Typical Wet Boiling Point: 156 °C

Product Safety:

This product is subject to specific safety instructions and warnings.

May cause long-term adverse effects in the environment.

Contains sensitising substances : May cause allergic reaction : Always read the label and biocide information before use : Handle this product with care : Do not dispose of as it causes long-term adverse effects on the environment : Collection points are available for the proper treatment of these oils

The images of our products may vary according to the manufacturer, maintaining all the technical characteristics and compatibilities indicated in the product specifications.