• New
Ring | Airbag Spiral Steering Wheel Contact Dacia Logan 2004 to 2013 | Sandero 2008 to 2013 | Duster 2010 to 2017 | 255672425R
  • Ring | Airbag Spiral Steering Wheel Contact Dacia Logan 2004 to 2013 | Sandero 2008 to 2013 | Duster 2010 to 2017 | 255672425R
  • Ring | Airbag Spiral Steering Wheel Contact Dacia Logan 2004 to 2013 | Sandero 2008 to 2013 | Duster 2010 to 2017 | 255672425R
  • Ring | Airbag Spiral Steering Wheel Contact Dacia Logan 2004 to 2013 | Sandero 2008 to 2013 | Duster 2010 to 2017 | 255672425R

Ring | Airbag Spiral Steering Wheel Contact Dacia Logan 2004 to 2013 | Sandero 2008 to 2013 | Duster 2010 to 2017 | 255672425R

€60.50
VAT included
Reference:
T430759

Quantity
Available

Do you need help ?

Line 1: 868 165 112
Line 2: 968 306 733
WhatsApp: 619 800 155

Remember to check reference OEM with your original autopart

You might also like

Product Description:

Ring | Steering Wheel Contact | Spiral Spring Airbag Dacia Logan from 2004 to 2013 | Sandero from 2008 to 2013 | Duster from 2010 to 2017 | OE 255672425R

Part No:

T430759

Similar OEM Part No:

25 56 724 25R | 255672425R | 251645

Mounting Side:

Steering Rod

Compatible Models:

DACIA

LOGAN (SD) de |2004 | 2005 | 2006 | 2007 | 2008 | 2009 

LOGAN (SD) de | 2009 | 2010 | 2011 | 2012 | 2013 | 

DUSTER (HS_) de 2010 | 2011 |2012 | 2013 | 

DUSTER (HS_) de | 2013 | 2014 | 2015 | 2016 | 2017 | 

SANDERO (SD) de | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 

Duster (HS) de 04-2010 a 09-2017

Logan (LS) de 2004 a 2012

Logan Express (FS) desde 2009

Logan MCV (KS) de 2007 a 2013

Logan Pick-Up (US) de 2008 a 2013

Sandero (SD) de 06-2008 a 01-2013

Other Specifications:

1 Connections to 2-Pin Steering Wheel Airbag (Yellow|Blue Connector)

1 Connection to 2-Pin Vehicle Installation with Terminal
Check compatibility with original part number and attachments below
THIS ELECTRICAL PART IS NOT WARRANTY AND RETURNABLE

ASSEMBLY INSTRUCTIONS

It is necessary to refer to the vehicle workshop manual to carry out the specialised service operations for this part.

If the service manual is not available or if you do not have the necessary skills to install this part, it is recommended that you call in a specialised technician.

Read and follow all instructions carefully and pay attention to all warnings and alerts in the vehicle manual.

Airbag systems are subject to the explosives legislation in force in each country. The following safety instructions must be observed when handling them:

-Stop the engine, disconnect the battery and wait for the electronic calculator memory to be cleared (at least 10 minutes). Start the engine and check that the instrument panel does not light up.

-Disconnect the airbag module before any intervention on the vehicle's electrical circuit (ohmmeter, measuring instruments, etc.)

-Handle the airbag modules with care (avoid knocks, keep the opening space free and store the airbag modules upwards)

-Never disassemble the module or connect a measuring device to the module itself.

Installation and removal of the airbag ring must be carried out in the central position (tyre direction must be in the straight-ahead position) and the steering wheel in the fully centred position.

The ring is supplied in the centre position and secured with a pin, the pin must be released after fitting, releasing the spring.

The spring must not be released before fitting under any circumstances, otherwise, if released before fitting, the spring will be distorted beforehand and is very likely to become detached during the operation and become unusable.

In case of needing recentering, follow the instructions below (valid for most of the references):

Turn the rotor counterclockwise (left) as far as it will go. Turn the rotor approximately 3.0 turns clockwise (right) until the rotor marks are aligned.

Spiral cable

The spiral cable represents the connection between the rigid steering column and the movable steering wheel. It ensures communication between the airbag control unit and the gas generator during the rotational movement of the steering wheel. The conductive foil is wound in such a way that it is able to follow the rotational movement of 2.5 turns in each direction.

It is important to be very careful when assembling or disassembling this spiral cable. It must be ensured that the steering is in the central position and that the wheels are also straight. If the spiral cable has been dismantled, it cannot be rewound.

The images of our products may vary according to the manufacturer, while maintaining all the technical characteristics and compatibilities indicated in the product specifications. Our company is associated to Fremm (Regional Federation of Metal Entrepreneurs of Murcia) and is part of the Association of Automobile Spare Parts Dealers of the Region of Murcia (ACRAREM).

Replacement parts category
Electric system and lights
Kind of replacement part
Airbag ring
cookie Cookie consent