Spiral Airbag Spool Connector Ring Ford Mondeo 2007 to 2014 | Galaxy 2006 to 2015 | S-Max 2006 to 2015 | OEM 6G9T14A664BD

Product Description:

Spiral Airbag Spool Connector Ring Ford Mondeo 2007 to 2014 | Galaxy 2006 to 2015 | S-Max 2006 to 2015 | OEM Similar to 6G9T14A664BD

Connections | Check Images:

2 Connections to Airbag (Steering Wheel):

1 of 2 Pins (Black Connector) + 1 of 14 Pins

2 Connections to Vehicle Installation:

1 6-Pin Connection + Terminal

1 10-Pin Connection

Part no:

T33632

Similar OEM part number:

ACV076 | 1676742 | 6G9T14A664BD | 6G9T14A664BG | 6G9T-14A664-BD | 6G9T1-4A664-BG | 1676742 | 6G9T14A664BD | AG9T-14A664-AD

Mounting Side:

--

Compatible Models:

MONDEO (BA7) de | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 |

GALAXY (WA6) de | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 |

S-MAX (WA6) de | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 |

Other Specifications:

Connections : Check in Pictures:

2 Connections to Airbag (Steering Wheel):

1 of 2 Pins (Black Connector) + 1 of 14 Pins

2 Connections to Vehicle Installation:

1 6-Pin Connection + Terminal

1 x 10 Pin Connection
Check compatibility with original part number and attachments below.
THIS ELECTRICAL COMPONENT IS WITHOUT WARRANTY AND RETURN

ASSEMBLY INSTRUCTIONS

Fitting and removal of the airbag ring must be carried out in the centre position (tyre direction must be in the straight ahead position) and the steering wheel in the fully centred position.

The ring is supplied in the centre position and is secured with a pin, the pin must be released after fitting by releasing the spring.

If re-centring is required, follow the instructions below:

Turn the rotor counterclockwise (left) as far as it will go. Turn the rotor approx. 3.0 turns clockwise (right) until the marks on the rotor are aligned.

The spring must not be released before installation under any circumstances, otherwise, if it is released before installation, the spring will be distorted beforehand and is very likely to become detached during operation and become unusable.

Spiral cable

The spiral cable represents the connection between the rigid steering column and the mobile steering wheel. It ensures communication between the airbag control unit and the gas generator during the rotational movement of the steering wheel. The conductive foil is wound in such a way that it is able to follow the rotational movement of 2.5 turns in each direction.

It is important to be very careful when assembling or disassembling this spiral cable. It must be ensured that the steering is in the central position and that the wheels are also straight. If the spiral cable has been dismantled, it cannot be rewound.

The products supplied may only be used for their intended purpose. Installation must be carried out by qualified personnel. The products are delivered without assembly instructions.