Universal Adaptable Catalytic Converter | EURO V Emission Standards | Round with Heat Protection | Total Length 340mm

Product Description:

Universal Adaptable Catalytic Converter | Suitable for EURO V Emission Standard (from January 2005 to September 2009) and maximum displacement 2.0 cc | Round with Heat Protection | Total Length 340mm | With Hole for Lambda Sensor | With screw for probe override

Pipe Diameter (Inner x Outer): 47x50 | 54x57 | 61x64 | Choose in Drop-Down Menu

With lambda sensor hole | Oxygen Sensor + Screw for lambda sensor hole

Total catalytic converter length (with extension pipe): 340 mm

Catalytic converter length (without extension pipe): 230 mm

Total width: up to 130 mm

Part no:

KAT5

Similar OEM part number:

Fitting Part : No OEM part number : Universal

Mounting Side:

Depending on Model

Compatible Models:

EURO V Emission Standard (from January 2005 to September 2009)

Other Specifications:

Material: Stainless steel Sus409-1.2

Pipe diameter (Inner x Outer): 47x50 | 54x57 | 61x64 | Choose from Drop Down Menu

With Oxygen Sensor Hole | Oxygen Sensor + Screw for Oxygen Sensor Hole

Total catalytic converter length (with extension pipe): 340 mm

Catalytic converter length (without extension pipe): 230 mm

Total width: up to 130 mm

Main causes of catalytic converter failure:

Engine tuning: incorrect air/fuel mixture, wear on spark plugs, etc.

Unburnt fuel in the catalytic converter: misfiring, inadequate regulation of the intake mixture, etc., can lead to clogging of the ceramic monolith and even to its melting.

Excessive oil consumption: clogging of the monolith, causing an excess of particles in the engine.

Knocks on the catalytic converter: breakage of the ceramic monolith.

What to do to correct these faults:

Ensure correct fitting and sealing of the catalytic converter and air cleaner and its constituent parts.

Check the cause of failure of the original catalytic converter to be replaced and correct it.

Check the lambda sensor and, if necessary, replace it with a new one.

Tune up the engine (correct tuning).

Replace damaged or worn spark plugs.

The average life of a catalytic converter is approximately 80,000 Km, before installing a new catalytic converter, FIX THE PROBLEM THAT CAUSED THE INITIAL CATALYST FAILURE, if your vehicle has caused a failure in the emission of gases, the simple fact of replacing the catalytic converter without checking other possible failures could cause the failure in the new catalytic converter or an incorrect gas reading.

Warranty:

Item that requires handling for installation and is therefore exempt from Manufacturer's Warranty.

This product is not homologated as it is an adaptation part.


The images of our products may vary according to the manufacturer, maintaining all the technical characteristics and compatibilities indicated in the product specifications.