Universal Adaptable Catalytic Converter | EURO V Emission Standards | Round with Heat Protection | Total Length 340mm

Product Description:

Universal Adaptable Catalytic Converter | Suitable for EURO V Emission Standard (from January 2005 to September 2009) and 2.0 cc maximum displacement | Round with Heat Shield | Overall Length 340mm

Inner pipe diameter: 51 | 57 | 64 mm (to be chosen from the drop down menu on the side)

Outside Pipe Diameter: 55 | 61 | 68 mm (Choose from side drop down menu)

With Oxygen Sensor Hole + Lambda Sensor Hole Screw + Oxygen Sensor Hole Screw

Catalytic Converter Total Length (with extension pipe): 340 mm

Catalytic converter length (without extension pipe): 230 mm

Total width: up to 130 mm

Part no:

KAT5

Similar OEM part number:

Fitting Part | No OEM Ordering Number | Universal

Mounting Side:

Depending on Model

Compatible Models:

EURO V Emission Standard (January 2005 to September 2009)

Other Specifications:

Material: Stainless Steel Sus409-1.2

Inner Pipe Diameter: 51 | 57 | 64 mm (To be selected from the drop down menu on the side)

Outer Pipe Diameter: 55 | 61 | 68 mm (Choose from side drop down menu)

With Lambda sensor hole | Oxygen sensor hole

Catalytic Converter Total Length (with extension pipe): 340 mm

Catalytic converter length (without extension pipe): 230 mm

Total width: up to 130 mm

Main causes of catalytic converter failure:

Engine tuning: incorrect air/fuel mixture, wear on spark plugs, etc.

Unburnt fuel in the catalytic converter: misfiring, inadequate regulation of the intake mixture, etc., can lead to clogging of the ceramic monolith and even to its melting.

Excessive oil consumption: clogging of the monolith, causing an excess of particles in the engine.

Knocks on the catalytic converter: breakage of the ceramic monolith.

What to do to correct these faults:

Ensure correct fitting and sealing of the catalytic converter and air cleaner and its constituent parts.

Check the cause of failure on the original catalytic converter to be replaced and correct it.

Check the lambda sensor and, if necessary, replace it with a new one.

Tune up the engine (correct tuning).

Replace damaged or worn spark plugs.

The average life of a catalytic converter is approximately 80,000 Km, before installing a new catalytic converter, FIX THE PROBLEM THAT CAUSED THE INITIAL CATALYST FAILURE, if your vehicle has caused a failure in the emission of gases, the simple fact of replacing the catalytic converter without checking other possible failures could cause the failure in the new catalytic converter or an incorrect gas reading.

Warranty:

Item requires handling for installation and is therefore exempt from manufacturer's warranty.


The images of our products may vary depending on the manufacturer, maintaining all the technical characteristics and compatibilities indicated in the product specifications. Our company is associated to the Fremm (Regional Federation of Metal Entrepreneurs of Murcia) and is part of the Association of Automobile Spare Parts Dealers of the Region of Murcia (ACRAREM).